Register now After registration you will be able to apply for this opportunity online.
This opportunity is not published. No applications will be accepted.
3D Printing Operator (m/f) - 15h/week or by arrangement
The Wyss Zurich Robotics Platform aims to support and accelerate projects in their transfer to market, by providing multidisciplinary expertise and services, covering a range of core competences such as engineering, prototyping, product development, and entrepreneurship.
The Wyss Zurich is a joint accelerator of the ETH Zurich and the University of Zurich, which was made possible by a generous donation from the Swiss entrepreneur and philanthropist Dr. hc. mult. Hansjörg Wyss. The mission of Wyss Zurich is to drive the clinical translation and technology transfer of outstanding scientific discoveries into new therapies for patients and breakthrough innovations in the emerging fields of Regenerative Medicine and Robotics, and to promote hybrid technologies in these fields. Wyss Zurich brings together some of the world’s leading experts to form multidisciplinary teams, pooling their knowledge and expertise. For further information: wysszurich.uzh.ch.
The translation of technologies into products, within the available time and resources, is one of start-ups’ major challenges. The Wyss Zurich Robotics Platform aims to support and accelerate projects in their transfer to market, by providing multidisciplinary expertise and services, covering a range of core competences such as engineering, prototyping, product development, and entre-preneurship. As part of our service we offer access to a state-of-the-art 3D printer.
Be part of a productive 3D printing platform to fabricate costumer specific parts for a wide range of applications in engineering, medicine, demonstration and art. In cooperation with your col-leagues you will be responsible for accepting orders, the interaction with customers, preparation and post-processing of prints as well as the operation and maintenance of the 3D printers. Your main task is the production of Polyamide 12 (Polymer) parts using a HP Multi Jet Fusion Printer, although additional 3D printing methods might also be required on occasion. Due to the nature of the job on-site presence is required. The work hours are mostly flexible.
The Wyss Zurich is a joint accelerator of the ETH Zurich and the University of Zurich, which was made possible by a generous donation from the Swiss entrepreneur and philanthropist Dr. hc. mult. Hansjörg Wyss. The mission of Wyss Zurich is to drive the clinical translation and technology transfer of outstanding scientific discoveries into new therapies for patients and breakthrough innovations in the emerging fields of Regenerative Medicine and Robotics, and to promote hybrid technologies in these fields. Wyss Zurich brings together some of the world’s leading experts to form multidisciplinary teams, pooling their knowledge and expertise. For further information: wysszurich.uzh.ch.
The translation of technologies into products, within the available time and resources, is one of start-ups’ major challenges. The Wyss Zurich Robotics Platform aims to support and accelerate projects in their transfer to market, by providing multidisciplinary expertise and services, covering a range of core competences such as engineering, prototyping, product development, and entre-preneurship. As part of our service we offer access to a state-of-the-art 3D printer.
Be part of a productive 3D printing platform to fabricate costumer specific parts for a wide range of applications in engineering, medicine, demonstration and art. In cooperation with your col-leagues you will be responsible for accepting orders, the interaction with customers, preparation and post-processing of prints as well as the operation and maintenance of the 3D printers. Your main task is the production of Polyamide 12 (Polymer) parts using a HP Multi Jet Fusion Printer, although additional 3D printing methods might also be required on occasion. Due to the nature of the job on-site presence is required. The work hours are mostly flexible.
As a candidate you should fit to the following points:
• Be an active ETH Bachelor or Master student.
• Be interested in 3D printing. Prior skills in 3D printing are not required.
• Motivation to interact with both our customers and our team are crucial.
• A high professional standard towards our customers as well as organization and reliability are essential.
• Language skills in both German and English are required.
Work description:
• Accepting, processing, and finishing orders, i.e. emails/website actions to inform cus-tomers about progress.
• Advising customers on their orders, i.e. informing them about design aspects, size limita-tions, material properties, tolerances, fabrication times, etc.
• Preparation of the prints using software Netfabb: Placing the parts, orienting them, choosing settings, etc.
• Preparing MJF printer for the next print, i.e. cleaning, choosing correct settings, replacing supplies, starting prints.
• Post-processing of the prints, i.e. freeing the parts from the powder, cleaning them using the sand-blaster, dying of parts.
• On occasion operation of other printers, e.g. Formlabs, Ultimaker, or Craftbot.
As a candidate you should fit to the following points: • Be an active ETH Bachelor or Master student. • Be interested in 3D printing. Prior skills in 3D printing are not required. • Motivation to interact with both our customers and our team are crucial. • A high professional standard towards our customers as well as organization and reliability are essential. • Language skills in both German and English are required.
Work description: • Accepting, processing, and finishing orders, i.e. emails/website actions to inform cus-tomers about progress. • Advising customers on their orders, i.e. informing them about design aspects, size limita-tions, material properties, tolerances, fabrication times, etc. • Preparation of the prints using software Netfabb: Placing the parts, orienting them, choosing settings, etc. • Preparing MJF printer for the next print, i.e. cleaning, choosing correct settings, replacing supplies, starting prints. • Post-processing of the prints, i.e. freeing the parts from the powder, cleaning them using the sand-blaster, dying of parts. • On occasion operation of other printers, e.g. Formlabs, Ultimaker, or Craftbot.
We look forward to receiving your application by email to robotics@wysszurich.ch with the following documents: CV and short motivation letter.
Further information about Wyss Zurich can be found on our website: www.wysszurich.ch. Questions regarding the position should be directed to Stefan Bertschi, email: stefan.bertschi@wysszurich.ch
We look forward to receiving your application by email to robotics@wysszurich.ch with the following documents: CV and short motivation letter.
Further information about Wyss Zurich can be found on our website: www.wysszurich.ch. Questions regarding the position should be directed to Stefan Bertschi, email: stefan.bertschi@wysszurich.ch