Laboratory for High Power Electronic SystemsOpen OpportunitiesIn this project, you will search the suitable current measurement methods and design the measurement system for strand current. You will validate your design with simulation tools like FEM. Finally you will implemented and test your design. - Electrical Engineering
- Master Thesis
| Development of a software tool which visualises the geometry of a basic switching cell based on geometrical parameters derived by converter optimisation procedures - Electrical Engineering
- Master Thesis, Semester Project
| Development of switching cell mechanical models in the X3D format based on geometrical parameters derived by converter optimisation procedures - Electrical Engineering
- Master Thesis, Semester Project
| In this project you will model the 3D geometry of litz wire by a mathematical algorithm. Furthermore, the current density distribution and the eddy current losses should be calculated for different termination strategies and for different litz wire geometries by FEM. The impact of improper terminations should be qualitatively/quantitatively analysed. - Electrical and Electronic Engineering
- Semester Project
| The project focuses on optimizing the compact Marx generator, which charges capacitors in parallel and discharges in series to produce high-voltage pulses. Through FEM simulations, the objective is to design capacitor arrangements that limit the electrical field, mitigating equipment failures, and extracting parasitic elements. - Electrical Engineering
- Master Thesis
| In this thesis the student is provided the opportunity to optimize and build a medium frequency transformer - Electrical and Electronic Engineering
- Master Thesis, Semester Project
| In this thesis the student will investigate different methods to measure the partial discharge inception of transformer winding geometries. - Electrical Engineering
- Master Thesis
|
|